You
may need to conduct repairs to chain link fence for a number of causes. The
cause can be anything, but it is an easy repair with some tools, instructions
and a little help. You can also go for welded panel fence UAE.
1.
Find all the damage
Inspect along both sides of the fence in places where there is
damage. Branch out from there to check for loose posts, gates, and top rails so
that you are aware of everything that requires attention. Make note of these
parts on a rough diagram to keep track of them.
2.
Measure and buy new parts you require
Take measurements between intact fence posts for your existing
fence. Count the posts that run throughout the damaged area to calculate the
length of new fence railing you will require. Measure the thickness of the railing so you
can buy the same size for the fence.
3.
Eliminate the damaged fence rail
Start by cutting the wire ties that hold the chain link to the
rail. Place the new fence rail on top of the old one and mark where you are
going to cut the damaged one. Make the other end of the rail where it will meet
a joint.
4.
Remove and eliminate damaged posts
Remove the fence railing and clip any ties that are still
intact and slide the old posts out of position. Install your new ones using the
same post holes.
5.
Install the new fence railing
Eliminate the nearest end post cap, brace bands, and vertical
tension bands from one end of the fence. Slide the new fence railing into the rail
cap slot, and along to where it is needed. Attach the end of this fence railing
and reconnect brace and tension bands.
6.
Fix the chain link fabric
While you hold the closest post, ask someone to remove you in
putting the undamaged chain link back over the new post. Look at an intact
fence section and check that the caps and bands are in the correct position before
tightening the connecting bolts fastening the chain link to each post.
7.
Maintain your chain link fence
8.
Keep your chain link fence well maintained. Check
it after heavy snow, after severe storms, and in spring where trees have
fallen.
0 Comments